Instructions - Wall Stickers

How to use

• Ensure the surface is smooth and even.
• Choose the place you want to apply, clean up the ash, dust, and grease, keep it dry and clean.
• Peel off the inner paper and then stick on the wall, pave from the middle to left and right.
• Peel off the outlayer slowly, cautioning the sticker not to come along with it.
• Pave the sticker again to ensure it is flattened. In case that bubbles are found whilst flattening, prick small bubbles with the tip of a needle and cut lager bubbles with a blade then wipe them out flat.

Notes

• Surface has to be clean, smooth, and free of dust, grease, silicone, latex, acrylic paint, and extra protection layer.
• Some glossy / silk paints or ‘special effec’ paints (e.g. light reflecting paints) can be difficult to apply wall stickers to because of their chemical properties
• If the wall has been recently painted, please make sure that it is completely dried.
• Please apply your stickers as soon as possible once you receive them so that their adhesive may not be weakened.

Suitable / Not Suitable for the following surfaces